| If you want to add a new project, you must have been assigned as an administrator or a power user otherwise you cannot add any new project. |
| If you want to add a new module, you must have been assigned as an administrator or a power user otherwise you cannot add any new module. |
| Make sure that once you have closed any project, you cannot even open or access the closed project. |
| Due to insufficient space, the captured figure of the **Joints** page is split as four. |
| **A** - Item to be cleared before hydrostatic test. **B** - Item to be cleared after hydrostatic test. **C** - Item which can be cleared after hydrostatic test but before final acceptance of the whole plant. |
| If you want to add a new project, you must have been assigned as an administrator or a power user otherwise you cannot add any new project. |
| If you want to add a new module, you must have been assigned as an administrator or a power user otherwise you cannot add any new module. |
| Make sure that once you have closed any project, you cannot even open or access the closed project. |
| The RT Requirement (%), UT Requirement (%), MT Requirement (%) and PT Requirement (%) should be filled with valid numerical numbers. The joint testing will be performed based on the value given by you for example, if you enter 100 % of requirement, which means 100 % of the joints will be tested. If you enter 0 %, none of joints will be tested. |
| If the weld map drawing is provided in single sheet, the **Sheet No** should be 1 of 1. If the drawing is stretched to two pages, then the **Sheet No** should be 1 of 2 and 2 of 2. |
| The **Master Drawing No** box and **Cutting Plan Drawing No** boxes provided in the upper right-side of the **Piece Mark Number** page including a drop-down arrow to easily sort the specific master drawing number and cutting plan drawing number. See Fig 3.8. |
| Once the joints have been hidden, the joints will not be available while adding any fit-up request. |
| **A** - Item to be cleared before hydrostatic test. **B** - Item to be cleared after hydrostatic test. **C** - Item which can be cleared after hydrostatic test but before final acceptance of the whole plant. |
| [](http://wiki.cuteinfocomm.com/uploads/images/gallery/2022-04/image-1651039906305.png) Users assigned with **cuteQM\_Power User** role only can access the **Master Data** menu and their functionalities. |
| You can add a new project if you have been assigned with **Power User** roles only. |
| You can add a new equipment if you have been assigned with **Admin** and **Power User** roles only. |
| Users assigned with **Admin** role only can access the **Manage User** menu and their functionalities. |
| Admin | The Admin role has full access to the system. Do not assign this to any one who really does not require. | Full Access to the system. |
| cuteQM\_Document | The Document Controller role manages access to inspection-related documentation across various modules. It includes viewing and managing key records for traceability and audit purposes | Access to Below Inspection Menus: 1.WPS and Weld Details 2. Project Data ( like Joint, Drawing etc.) 3.Materials management 4.Fit-up & NDT records 5.Stage-wise inspection 6. Documentation |
| cuteQM\_PowerUser | This role is designed for power users responsible for setting up new projects and managing critical administrative tasks across the cuteQM. | Access to Below Inspection Menus: 1. Project and Company creation 2. Manage User |
| cuteQM\_WeldProduction | This role user only able to fitup/weld production activity | This role user only able to fitup/weld production activity |
| cuteQM\_WeldInspection | This role user only able to fitup/weld Inspection activity | This role user only able to fitup/weld Inspection activity |
| The welder qualification data in Yellow color shows that the welder qualification data are about to expire within 15 days. So, you must requalify the welder. The welder qualification data in Red color shows that the welder qualification data has expired. So, you must requalify the welder. To know how to requalify the welder, see the topic, “[**Requalify the Added WPQ of Welder**](http://wiki.cuteinfocomm.com/books/cuteqm/page/welding#bkmrk-6.4.4-requalify-the-)”. |
| **Before Fit up** – If you select any NDT type listed in the **Before Fit up** option for a joint, the selected NDT type should be completed before adding the Fit up inspection request for the joint. For example, if you select both **RT** and **MT,** you must do both RT and MT. **Back Chipping** - If you select any NDT type listed in the **Back Chipping** option for a joint, the selected NDT type should be completed before adding the weld visual inspection request for the joint. **NDT** - If you select any NDT type listed in the **NDT** option for a joint, the selected NDT type should be completed after performing the weld visual inspection for the joint. **PWHT** - If you select any NDT type listed in the **PWHT** option for a joint, the selected NDT type should be completed after performing the above NDT. **Other NDT** - If you select any NDT type listed in the **Other NDT** option for a joint, the selected NDT type should be completed after performing the above PWHT. |
| Users assigned with **Production** role only can view and access the **Production - RFI** menu and their functionalities. |
| The joints in Yellow color shows that the Before Fit up/PT/MT/EP are not completed for the respective joints. Note that the [](http://wiki.cuteinfocomm.com/uploads/images/gallery/2022-04/image-1651067733730.png) (Edit icon) will not be enabled before you complete the Before Fit up. The joints in Red color shows that the Fit up is rejected for the respective joints. |
| Users assigned with **Production** role only can view the **Fit up** window. |
| Users assigned with **cuteQM\_QAQC** role only can view and access the **Inspection** **– Quality** menu and their functionalities. |
| The joints in Red color shows that the respective joints are rejected in NDT (RT/UT/PT/MT). For example, if J1 joint is rejected in RT then the joint will be created as J1R1 in the Weld visual page. If the same joint is rejected again in RT then the joint will be created as J1R2. Even after two times if the joint is rejected again in RT then the cut-out joint RW1 created as a new joint in the Fit up page. Note that the created J1R1 and J1R2 joints will be shown in Orange color. |
| Users assigned with **Production** role only can view the **Production** window. |
| Users assigned with **cuteQM\_QAQC** role only can view and access the **Inspection** **– Quality** menu and their functionalities. |
| Note that If the inspection results for any added NDT request has been updated, you cannot edit the respective NDT request. |
| If the inspection results for any added NDT request has been updated, you cannot reject the respective NDT request. |
| Note that if the final dimensional request has been submitted, you cannot edit the respective request. |
| Note that if the nozzle marking inspection request has been submitted, you cannot edit the respective request. |
| Note that if the alignment reading request has been submitted, you cannot edit the respective request. |
| Note that if the ovality reading request has been submitted, you cannot edit the respective request. |
| Note that if the thickness request has been submitted, you cannot edit the respective request. |
| Note that if the VPCI request has been submitted, you cannot edit the respective request. |
| Note that if the leak test request has been submitted, you cannot edit the respective request. |
| Note that if the hydrostatic pressure test request has been submitted, you cannot edit the respective request. |
| Note that if the shell side hydrostatic pressure test request has been submitted, you cannot edit the respective request. |
| Note that if the pneumatic pressure test request has been submitted, you cannot edit the respective request. |
| Note that if the flange face inspection request has been submitted, you cannot edit the respective request. |
| Note that if the drining and dring inspection request has been submitted, you cannot edit the respective request. |
| Note that if the shipment inspection request has been submitted, you cannot edit the respective request. |
| Note that if the name plate inspection request has been submitted, you cannot edit the respective request. |
| Note that if the stamp verification inspection request has been submitted, you cannot edit the respective request. |
| Note that if the dishend dimension inspection request has been submitted, you cannot edit the respective request. |
| Note that if the dishend thickness inspection request has been submitted, you cannot edit the respective request. |
| Note that if the vessel NDT inspection request has been submitted, you cannot edit the respective request. |
| Note that if the PWHT inspection request has been submitted, you cannot edit the respective request. |
| Note that if the pre-welding inspection request has been submitted, you cannot edit the respective request. |
| Users assigned with **cuteQM\_QAQC** role only can view and access the **Inspection - Quality menu and their functionalities. |
| Users assigned with **cuteQM\_MechInspection** role only can view the **Mechanical Inspection** window and add the mechanical inspection details. |
| Users assigned with **cuteQM\_WeldInspection** role only can view the **Pre-Welding Inspection** window to add the pre-welding inspection details. |
| Users assigned with **cuteQM\_QAQC** role only can view the **Inspection** window and add the weld visual inspection details. |
| Users assigned with **cuteQM\_NDT** role only can view and access the **NDT menu and their functionalities. |
| **Accepted** – If you select **Accepted**, the respective joint will be moved for further process. **Rejected** – If you select **Rejected**, the respective joint will be rejected in the [**NDT Request – RFI**](http://wiki.cuteinfocomm.com/books/cuteqm/page/production-rfi#bkmrk-8.3-ndt-request-%E2%80%93-rf) page and moved to [**Weld visual**](http://wiki.cuteinfocomm.com/books/cuteqm/page/production-rfi#bkmrk-8.2-weld-visual---re) page with the sub name of suffix 'R1', for example if the joint J1 means it will be added as J1 R1. **Reshoot** – If you select **Reshoot**, the respective joint will be moved into the [**NDT Request – RFI**](http://wiki.cuteinfocomm.com/books/cuteqm/page/production-rfi#bkmrk-8.3-ndt-request-%E2%80%93-rf) page. |
| **Accepted** – If you select **Accepted**, the respective joint will be moved for further process. **Rejected** – If you select **Rejected**, the respective joint will be rejected in the [**NDT Request – RFI**](http://wiki.cuteinfocomm.com/books/cuteqm/page/production-rfi#bkmrk-8.3-ndt-request-%E2%80%93-rf) page and moved to [**Weld visual**](http://wiki.cuteinfocomm.com/books/cuteqm/page/production-rfi#bkmrk-8.2-weld-visual---re) page with the sub name of suffix 'R1', for example if the joint J1 means it will be added as J1 R1. |
| **Accepted** – If you select **Accepted**, the respective joint will be moved for further process. **Rejected** – If you select **Rejected**, the respective joint will be rejected in the [**NDT Request – RFI**](http://wiki.cuteinfocomm.com/books/cuteqm/page/production-rfi#bkmrk-8.3-ndt-request-%E2%80%93-rf) page and moved to [**Weld visual**](http://wiki.cuteinfocomm.com/books/cuteqm/page/production-rfi#bkmrk-8.2-weld-visual---re) page with the sub name of suffix 'R1', for example if the joint J1 means it will be added as J1 R1. |
| **Accepted** – If you select **Accepted**, the respective joint will be moved for further process. **Rejected** – If you select **Rejected**, the respective joint will be rejected in the [**NDT Request – RFI**](http://wiki.cuteinfocomm.com/books/cuteqm/page/production-rfi#bkmrk-8.3-ndt-request-%E2%80%93-rf) page and moved to [**Weld visual**](http://wiki.cuteinfocomm.com/books/cuteqm/page/production-rfi#bkmrk-8.2-weld-visual---re) page with the sub name of suffix 'R1', for example if the joint J1 means it will be added as J1 R1. |
| **Accepted** – If you select **Accepted**, the respective joint will be moved for further process. **Rejected** – If you select **Rejected**, the respective joint will be rejected in the [**NDT Request – RFI**](http://wiki.cuteinfocomm.com/books/cuteqm/page/production-rfi#bkmrk-8.3-ndt-request-%E2%80%93-rf) page and moved to [**Weld visual**](http://wiki.cuteinfocomm.com/books/cuteqm/page/production-rfi#bkmrk-8.2-weld-visual---re) page with the sub name of suffix 'R1', for example if the joint J1 means it will be added as J1 R1. |
| **Accepted** – If you select **Accepted**, the respective joint will be moved for further process. **Rejected** – If you select **Rejected**, the respective joint will be rejected in the [**NDT Request – RFI**](http://wiki.cuteinfocomm.com/books/cuteqm/page/production-rfi#bkmrk-8.3-ndt-request-%E2%80%93-rf) page and moved to [**Weld visual**](http://wiki.cuteinfocomm.com/books/cuteqm/page/production-rfi#bkmrk-8.2-weld-visual---re) page with the sub name of suffix 'R1', for example if the joint J1 means it will be added as J1 R1. |
| **Accepted** – If you select **Accepted**, the respective joint will be moved for further process. **Rejected** – If you select **Rejected**, the respective joint will be rejected in the [**NDT Request – RFI**](http://wiki.cuteinfocomm.com/books/cuteqm/page/production-rfi#bkmrk-8.3-ndt-request-%E2%80%93-rf) page and moved to [**Weld visual**](http://wiki.cuteinfocomm.com/books/cuteqm/page/production-rfi#bkmrk-8.2-weld-visual---re) page with the sub name of suffix 'R1', for example if the joint J1 means it will be added as J1 R1. |
| **Accepted** – If you select **Accepted**, the respective joint will be moved for further process. **Rejected** – If you select **Rejected**, the respective joint will be rejected in the [**NDT Request – RFI**](http://wiki.cuteinfocomm.com/books/cuteqm/page/production-rfi#bkmrk-8.3-ndt-request-%E2%80%93-rf) page and moved to [**Weld visual**](http://wiki.cuteinfocomm.com/books/cuteqm/page/production-rfi#bkmrk-8.2-weld-visual---re) page with the sub name of suffix 'R1', for example if the joint J1 means it will be added as J1 R1. |
| **Accepted** – If you select **Accepted**, the respective joint will be moved for further process. **Rejected** – If you select **Rejected**, the respective joint will be rejected in the [**NDT Request – RFI**](http://wiki.cuteinfocomm.com/books/cuteqm/page/production-rfi#bkmrk-8.3-ndt-request-%E2%80%93-rf) page and moved to [**Weld visual**](http://wiki.cuteinfocomm.com/books/cuteqm/page/production-rfi#bkmrk-8.2-weld-visual---re) page with the sub name of suffix 'R1', for example if the joint J1 means it will be added as J1 R1. |
| **Accepted** – If you select **Accepted**, the respective joint will be moved for further process. **Rejected** – If you select **Rejected**, the respective joint will be rejected in the [**NDT Request – RFI**](http://wiki.cuteinfocomm.com/books/cuteqm/page/production-rfi#bkmrk-8.3-ndt-request-%E2%80%93-rf) page and moved to [**Weld visual**](http://wiki.cuteinfocomm.com/books/cuteqm/page/production-rfi#bkmrk-8.2-weld-visual---re) page with the sub name of suffix 'R1', for example if the joint J1 means it will be added as J1 R1. |
| Users assigned with **Production** role only can view and access the following **RFI** functionalities in the **Heat Exchanger** menu, and can add the following inspection requests. |
| Note that if the final dimensional request has been submitted, you cannot edit the respective request. |
| Note that if the nozzle marking inspection request has been submitted, you cannot edit the respective request. |
| Note that if the shell side hydrostatic pressure test request has been submitted, you cannot edit the respective request. |
| Note that if the leak test request has been submitted, you cannot edit the respective request. |
| Note that if the tube expansion inspection request has been submitted, you cannot edit the respective request. |
| Note that if the tube mock up inspection request has been submitted, you cannot edit the respective request. |
| Note that if the pickling and passivation inspection request has been submitted, you cannot edit the respective request. |
| Note that if the baffle/support plate/tube sheet inspection request has been submitted, you cannot edit the respective request. |
| Note that if the tube bundle skeleton inspection request has been submitted, you cannot edit the respective request. |
| Note that if the tube bundle final dimension inspection request has been submitted, you cannot edit the respective request. |
| Users assigned with **cuteQM\_QAQC** role only can view and access the following **Report** functionalities in the **Heat Exchanger** menu. |