Mobile App - Electrical and Instrumentation

• 1.User Management
• 2. RFI

1.User Management

1.1 Downloading cuteQM app

To use the cuteQM app you must first download it from the Play Store.

1. Open the Play Store and search for “cuteQM”.
2. Download and install the cuteQM app on your mobile phone.
3. After installation, open the cuteQM

You are ready to go!

1.2 Log in

After installation, when you open the cuteQM app you may be asked to Login. Follow the steps to successfully log into your account. 

              

1. Before enter your user id and password, tap  (Settings icon) and enter the app URL            http://www.cuteqm.com/cuteQMPTUSPAPI.  

2. Tap Save.

3. Enter your user id and password in the allocated fields.

4. Tap Log in to complete the process.

The home screen of the cuteQM app is appeared.

1.3 Home screen of cuteQM app

             

1. Module – helps to select the module. Select Electrical module
2. Project – Helps to select the project. select the project.                                                                                         
3. Click Save button to go to the menu screen.

(show/hide icon) helps to show/hide the user id information that is displayed in the right panel of the home screen. if you touch this icon the information appears on, if you touch this icon again the information goes off.

• Clear Storage - clears all data in this app. Tap the Clear Storage option to delete all the data.
• Sync Data- synchronizes your inspection results with the respective reports in the web application. If your inspection results are not automatically synchronized with the web application, tap the Sync Data option for manual synchronization.
• Log out - To log out from the cuteQM app.

2. RFI

2.1. Glanding & Termination RFI

2.1.1.RFI Glanding Add

       

     

1. Click RFI Glanding Add menu  .This menu helps to add the cables for the RFI Glanding request.                  
2. Select cable no in the dropdown list.
3. Toggle ON the appropriate cable
4. Enter L1,L2,L3..Values
5. Enter description.
6. Enter Continuity
7. Click Save icon.

    

Glanding request added successfully.

2.1.2.RFI Glanding Create

     

1. Click RFI Glanding  create menu.This menu helps to create RFI requests from added cables.
2. Select the cable no from dropdown list
3. Toggle ON the required cable
4. Click Create button at the top
5. After create button clicked,a popup will open to key in inspection date,subcontractor ,description & calibration details.    

 

6. Click Create button.

RFI Glanding request created successfully.

2.1.3.RFI Glanding Approve

         

1. Click RFI Glanding approve menu
2. Select the RFI request no from dropdown list
3. Click Approve button.

Glanding request approved successfully.

2.1.4.RFI Glanding Inspection

1.Click RFI Glanding menu in Inspection.

2.Click  button .It will redirected to new page

       

1. Result will be defaultly accepted,If need to reject,you can change the dropdown as Reject
2. Enter Description
3. Enter Remarks
4. Click Save button.                                                                                                                                                                           RFI Glanding inspection approved successfully.

2.2. Fitup/Visual RFI

2.2.1.RFI Fitup/Visual Add

   

1. Click RFI Fitup/visual Add menu  .This menu helps to add the compartments for the RFI  Fitup/visual request.                 
2. Select compartment no in the dropdown list.
3. Toggle ON Fitup or weld as required
4. Toggle ON the appropriate compartment
5. Enter description.
6. Enter location.
7. Click Save icon.

 Fitup/visual request added successfully.

2.2.2.RFI  Fitup/Visual Create

     

1. Click RFI  Fitup/visual  create menu.This menu helps to create RFI requests from added compartments.
2. Select the compartment no from dropdown list
3. Toggle ON the required comprtment
4. Click Create button at the top
5. After create button clicked,a popup will open to key in inspection date,subcontractor and description.    

             

6. Click Create button.

RFI  Fitup/visual request created successfully.

2.2.3.RFI  Fitup/Visual Approve

   

1. Click RFI  Fitup/visual approve menu
2. Select the RFI request no from dropdown list
3. Click Approve button.

 Fitup/visual request approved successfully.

2.2.4.RFI  Fitup/Visual Inspection

1.Click RFI  Fitup/visual menu in Inspection.

2.Click  button .It will redirected to new page

       

1. Result will be defaultly accepted,If need to reject,you can change the dropdown as Reject
2. Enter Description
3. Enter Remarks
4. Click Save button.                                                                                                                                                                           RFI  Fitup/visual inspection approved successfully.

2.3. Cable dressing & Banding RFI

2.3.1.Cable dressing Add

     

1. Click RFI Cable dressing Add menu  .This menu helps to add the compartments for the RFI cable dressing request.         
2. Select compartment no in the dropdown list.
3. Toggle ON the appropriate compartment
4. Enter description.
5. Click Save icon.

    

 Cable dressing & Banding request added successfully.

2.3.2.RFI  Cable dressing Create

   

1. Click RFI  Cable dressing  create menu.This menu helps to create RFI requests from added compartments.
2. Select the compartment no from dropdown list
3. Toggle ON the required comprtment
4. Click Create button at the top
5. After create button clicked,a popup will open to key in inspection date,subcontractor and description.    

             

6. Click Create button.

RFI  Cable dressing & Banding request created successfully.

2.3.3.RFI  Cable dressing Approve

     

1. Click RFI  Cable dressing approve menu
2. Select the RFI request no from dropdown list
3. Click Approve button.

 Cable dressing & Banding request approved successfully.

2.3.4.RFI  Cable dressing & Banding Inspection

1.Click RFI  Cable dressing menu in Inspection.

2.Click  button .It will redirected to new page

               

1. Result will be defaultly accepted,If need to reject,you can change the dropdown as Reject
2. Enter Description
3. Enter Remarks
4. Click Save button.                                                                                                                                                                           RFI  Cable dressing & Banding inspection approved successfully.

2.4. Torque Tightening RFI

2.4.1.RFI Torque Add

           

1. Click RFI Torque Add menu  .This menu helps to add the equipments for the RFI Torque request.                  
2. Select equipment location in the dropdown list.
3. Toggle ON the appropriate equipment
4. Enter description.
5. Click Save icon.

Torque RFI request added successfully.

2.4.2.RFI Torque Create

     

1. Click RFI Torque  create menu.This menu helps to create RFI requests from added equipments.
2. Select the equipment location  from dropdown list
3. Toggle ON the required equipment
4. Click Create button at the top
5. After create button clicked,a popup will open to key in inspection date,subcontractor ,description & calibration details.    

6. Click Create button.

RFI Torque  request created successfully.

2.4.3.RFI Torque  Approve

     

1. Click RFI Torque approve menu
2. Select the RFI request no from dropdown list
3. Click Approve button.

Torque RFI request approved successfully.

2.4.4.RFI Torque Inspection

1.Click RFI Torque  menu in Inspection.

2.Click  button .It will redirected to new page

         

1. Result will be defaultly accepted,If need to reject,you can change the dropdown as Reject
2. Enter Description
3. Enter Remarks
4. Click Save button.                                                                                                                                                                           RFI Torque  inspection approved successfully.

2.5. Compound filling/MCT Packing RFI

2.5.1.Compound filling Add

           

1. Click RFI Compound filling Add menu  .This menu helps to add the compartments for the RFI Compound filling request.    
2. Select compartment no in the dropdown list.
3. Toggle ON the appropriate compartment
4. Enter description.
5. Click Save icon.

 Compound filling request added successfully.

2.5.2.RFI Compound filling Create

     

1. Click RFI  Compound filling  create menu.This menu helps to create RFI requests from added compartments.
2. Select the compartment no from dropdown list
3. Toggle ON the required comprtment
4. Click Create button at the top
5. After create button clicked,a popup will open to key in inspection date,subcontractor and description.    

       

6. Click Create button.

RFI  Compound filling request created successfully.

2.5.3.RFI  Compound filling Approve

       

1. Click RFI  Compound filling approve menu
2. Select the RFI request no from dropdown list
3. Click Approve button.

 Compound Filling /MCT Packing RFI request approved successfully.

2.5.4.RFI Compound Filling /MCT Packing Inspection

1.Click RFI  Cable dressing menu in Inspection.

2.Click  button .It will redirected to new page

   

1. Result will be defaultly accepted,If need to reject,you can change the dropdown as Reject
2. Enter Description
3. Enter Remarks
4. Click Save button.                                                                                                                                                                           RFI  Compound Filling /MCT Packing inspection approved successfully.

2.6. Equipment Megger Test RFI

2.6.1.RFI Megger Add

     

1. Click RFI Torque Add menu  .This menu helps to add the equipments for the RFI megger request.                  
2. Select equipment location in the dropdown list.
3. Toggle ON the appropriate equipment
4. Enter description.
5. Enter L1,L2,L3 Values
6. Enter room temperature
7. Enter Equipment temperature
8. Click Save icon.

RFI Megger request added successfully.

2.6.2.RFI Megger Create

       

1. Click RFI Megger  create menu.This menu helps to create RFI requests from added equipments.
2. Select the equipment location  from dropdown list
3. Toggle ON the required equipment
4. Click Create button at the top
5. After create button clicked,a popup will open to key in inspection date,subcontractor ,description & calibration details.    

6. Click Create button.

RFI Megger request created successfully.

2.6.3.RFI Megger  Approve

       

1. Click RFI  Megger approve menu
2. Select the RFI request no from dropdown list
3. Click Approve button.

Equipment megger RFI request approved successfully.

2.6.4.RFI Megger Inspection

1.Click RFI Megger menu in Inspection.

       

2.Click  button .It will redirected to new page

   

1. Result will be defaultly accepted,If need to reject,you can change the dropdown as Reject
2. Enter Description
3. Enter L1,L2,L3,Room temperature & Equipment temperature values
4. Enter Remarks
5. Click Save button.                                                                                                                                                                           RFI Equipment megger test inspection approved successfully.